Filter By:
- Lubes/Cleaners (217)
- Tools (1000)
- Workstands (63)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools/Maintenance
$8.99 - $11.99
Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film on your chain this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!
$25.00 - $40.00
- Anti-Loosening, Anti-Corrosion thread prep with PTFE
- Two colors offer coating for different spoke lengths
$62.50
Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red
$160.00
- Bearing extractor set for small bearings
- (1) 608, (1) 609, (1) 6000, (1) 6001
$95.00
This 23-piece Wheels Mfg. drift set is used to install 10mm and larger inside diameter sealed bearings, using a press with 3/8" diameter rod - Includes open bore and over axle drifts for 6802, 6901, 6902, 6903, 6000, and 6001 bearings - 10mm ID hole, for use with Wheels Manufacturing PRESS-1 or PRESS-4 bearing press handles
$7.50 - $9.50
Wheels Manufacturing Over Axle Adapters are used for pressing your most commonly used bearing sizes into place. Each represents an excellent addition to the Press-4 Bearing Press.
- Adapters sold individually
$102.50
Replacement handle assembly for Wheels Mfg. large sealed bearing press (PRESS-1). Primarily designed for pressing bearings into hubs. Note: rod diameter is smaller than the hole size in Wheels Mfg. universal bottom bracket drift. Includes: - Machined fixed end aluminum "T" handle with brass insert - Machined non-fixed end aluminum "T" handle with brass insert - 3/8" x 12TPI threaded rod - M5x12mm flat head screw to secure fixed-end handle to rod
$97.00
PRESS-1 Handle & Rod Assembly
Replacement Handle Assembly for our Large Sealed Bearing Press (PRESS-1). Primarily designed for pressing bearings into hubs.
Note: Rod diameter is smaller than the hole size in our Universal Bottom Bracket Drift.
Includes:
- (1) Machined fixed end aluminum "T" Handle.
- (1) Machined non-fixed end aluminum "T" Handle.
- (1) 3/8" x 12" Threaded Rod
- (1) M5x12 flat head screw to secure fixed-end handle to rod
$49.55
- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings.
- Precision machined aluminum body.
- Anodized in Wheels MFG red.
$39.95
Wheels Manufacturing Sealed Bearing Extractor - 17mm Fits the following bearings: - 6003 - 6803 - 6903 - 17287
$27.50
The Wheels Manufacturing universal bottom bracket drift presses all current Wheels Mfg bottom bracket cups into your frame or bearing cups. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. Each step is laser etched with the diameter size. - Inner hole sized to fit 1/2" threaded rod. Not for use with Wheels Mfg PRESS-1 or PRESS-4 - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg Universal BB Press - Machined aluminum - Anodized Red - Sold individually - Drift can also be used as a frame bottom bracket shell sizing guide! Fits the following bottom bracket shell sizes: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm)
$5.18 - $8.60
High-quality Kraftform Plus screwdriver. The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.
- Kraftform Plus: hard gripping zones for high working speeds, while soft zones ensure high torque transfer
- Hexagonal ball point screwdriver
- Multi-component Kraftform handle for fast and ergonomic screwdriving
- "Take-it-easy" tool finder: color coding according to profile and size
- Hexagonal blade and ballpoint for secure working even in difficult installation situations
- The Wera Black Point tip offers an exact fit and optimum corrosion protection
$4.04 - $7.78
High-quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. "Take-it-easy" Tool Finder: color coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.
- Hexagonal screwdriver hex-plus
- Multi-component Kraftform handle for fast and ergonomic screwdriving
- Take-it-easy tool finder: color coding according to profile and size
- Hex-plus allows socket head screws to live longer
- Hexagonal anti-roll feature against rolling away
$9.99
For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal.
- Pack of 10, fits 9/16" pedals.
- Pedal thread inserts are used to replace damaged threads in cranks
$16.99
Service your TRP brakes like a pro with our new Bleed Funnel.
COMPATIBILITY CHART
BRAKE MODEL COMPATIBILITY
QUADIEM SERIES YES
TRAIL SERIES YES
SLATE SERIES NO*
HYLEX SERIES YES
HY/RD SERIES YES
HYDRO TT YES
DASH SERIES NO
After feedback from our pro Athletes (and their mechanics) we have developed the TRP bleed funnel to simplify the bleed process. Take your service to the next level.
*Slate uses a smaller bleed fitting. Funnel can be used with a slate Bleed fitting adapter
$9.99
• High gloss formula provides the ultimate shine on all surfaces: metal, carbon fiber, plastic, rubber and vinyl.
• Polishes and protects in one easy step
• Use on bicycles, fitness equipment, motorcycles, watercraft, ATVs and more.
• Slick film helps prevent dirt build-up on frame and parts.
$9.95
Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!
$8.50
Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.
$11.00
Shimano Hydraulic Disc Brake Fluid
- Non-corrosive mineral oil that offers excellent heat expansion properties
- Mineral oil will not absorb water from the air
- Not caustic and is non-toxic
$60.00
The ultimate starter combo kit!
- Medium-sized saddle bag
- Ballistic nylon bottle cage
- 15 function super tool with CO2 inflator
- Tire levers
- 8-piece patch kit
- 2 threaded 16g CO2 cartridges
Standard bleed kit for mineral oil brakes
- Includes 2 syringes/2 M4 fittings, bleed block, Torx tool, crowfoot
- SRAM Model ID: DB-SPP-A0
$14.00
DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes
- Brake Fluid Type: DOT 5.1
- Bottle Size (Brake Fluid): 4 oz
- Application (Brake Fluid): Disc Brakes
$11.00
DOT Disc Brake Assembly Grease is specially formulated for DOT-fluid brake systems.
- Recommended for lever pistons, hose compression nuts, threaded barbs, and olives
$83.00
SRAM's Disc Brake Bleed Kit has everything you need to ensure your brakes are dialed. The kit is compatible with SRAM X0, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following:
• 2 syringes/fittings
• bleed blocks
• Torx tool
• Crow's foot
• Bleeding Edge Fitting
• DOT 5.1 hydraulic fluid
$25.00
SRAM's Hydraulic Hose Cutter is a hand-held cutter for easily, quickly and precisely cutting and sizing your non-braided hydraulic lines.
Handy and affordable, this tool makes it easy to get a clean cut every time.
- Securely holds hose while cutting
- Replaceable blade
- Metal construction holds up to frequent use
$6.00
The new B-gap adjustment tool is simple and easy to use, allowing for a quick set up experience. Small enough to be able to pack in your ride bag or stash in your toolbox for repeated use, it is also industrially recyclable if you find you no longer have use for it. This is the most precise tool for setting up and adjusting your drivetrain.
$36.00
Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.
Page 1 of 43
Next page