Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

Wolf Tooth Components 8-Bit Pliers
$69.95
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
Wolf Tooth Components B-RAD 4-Base Mount
$24.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
Wolf Tooth Components B-RAD Double Bottle Adapter
$24.95
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base
White Lightning Clean Ride
$8.99 - $11.99
Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film on your chain this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!
Whisky Parts Co. It's the 90s Keg
$14.00
Safely stash tools, treats, keys, and other personal items in the Whisky Parts Co. It's the '90s Keg, featuring can't-miss-it color and an easy screw-down top. - Keeps frequently needed items secure and dry - 16 oz.
Wheels Manufacturing Inc. Bottom Bracket Socket
$62.50
Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red
Wheels Manufacturing Inc. Hub Bearing Extractor Kit EX0001
$160.00
- Bearing extractor set for small bearings - (1) 608, (1) 609, (1) 6000, (1) 6001
Wheels Manufacturing Inc. Hub Bearing Installation Drift Set
$95.00
This 23-piece Wheels Mfg. drift set is used to install 10mm and larger inside diameter sealed bearings, using a press with 3/8" diameter rod - Includes open bore and over axle drifts for 6802, 6901, 6902, 6903, 6000, and 6001 bearings - 10mm ID hole, for use with Wheels Manufacturing PRESS-1 or PRESS-4 bearing press handles
Wheels Manufacturing Inc. Over Axle Adapter
$7.50 - $9.50
Wheels Manufacturing Over Axle Adapters are used for pressing your most commonly used bearing sizes into place. Each represents an excellent addition to the Press-4 Bearing Press. - Adapters sold individually
Wheels Manufacturing Inc. PRESS-1 Handle & Rod Assembly
$97.00
PRESS-1 Handle & Rod Assembly Replacement Handle Assembly for our Large Sealed Bearing Press (PRESS-1). Primarily designed for pressing bearings into hubs. Note: Rod diameter is smaller than the hole size in our Universal Bottom Bracket Drift. Includes: - (1) Machined fixed end aluminum "T" Handle. - (1) Machined non-fixed end aluminum "T" Handle. - (1) 3/8" x 12" Threaded Rod - (1) M5x12 flat head screw to secure fixed-end handle to rod
Wheels Manufacturing Inc. Universal Bottom Bracket Drift
$27.50
The Wheels Manufacturing universal bottom bracket drift presses all current Wheels Mfg bottom bracket cups into your frame or bearing cups. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. Each step is laser etched with the diameter size. - Inner hole sized to fit 1/2" threaded rod. Not for use with Wheels Mfg PRESS-1 or PRESS-4 - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg Universal BB Press - Machined aluminum - Anodized Red - Sold individually - Drift can also be used as a frame bottom bracket shell sizing guide! Fits the following bottom bracket shell sizes: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm)
Wera 8100 Zyklop Metric Speed Ratchet Set
$193.86 - $239.25
Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling thanks to the unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility. - Freely pivoting ratchet head with 5 predefined locking positions - Fine toothing with 72 teeth - Small return angle of only 5 degrees - Free-turning sleeve for high working speeds - Take-it-easy tool finder: color coding by size
Wald 114 Front Lift-Off Basket
$32.99
- Includes basket holder - Carrying handle for off bike use - Polyester powder coating - 11.75" x 8" x 9"
Wald 133 Quick-Release Basket
$39.99
One of the best selling items in Wald's entire catalog, this basket set the precedent for quick-release convenience and is perfect for carrying small bags of groceries. - Made in U.S.A. (Maysville, KY) - This Quick Release Baskets comes with a detachable Slip-on Holder for simple installation - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14 x 9.5 x 9 inches; the basket tapers to 12.25 x x 7 inches - Holder is designed to fit 7/8" handlebar, hooks are 4 1/2" apart - Available in white (133WH) or black (133GB) Powder Coat Finish - Complete basket including the holder weighs 2.4 lbs.
Wald 582 Rear Folding Basket
$39.99
The Wald 582 sets the standard for ingenuity when it comes to rear baskets. Mounting to the side of many rear racks, this nimble basket is the perfect size for packing 1-2 bags of groceries while balancing your load. When not in use, the base of the basket pivots up allowing the side walls to collapse. A simple clamp at the top keeps the basket out of your way when not in use. - Made in U.S.A. (Maysville, KY) - Baskets clamp to most rear racks up to 1/2" diameter - When not in use the base of the basket pivots up allowing the side walls to collapse making the collapsed basket 1" thick - A simple clamp at the top keeps the basket out of your way when collapsed - Extended basket is 12 3/4" front to back x 7 1/4" side to side x 8 1/2" deep - 582 Baskets have a Zinc Plated Finish; 582BL and 582WH Baskets have a Powder Coat Finish - Complete basket weighs 2.8 lbs.
Wahoo ELEMNT RIVAL GPS Multisports Watch
$379.99
ELEMNT RIVAL Multisport Watch keeps the focus locked on your performance, not your equipment. Using the intuitive ELEMNT operating system, RIVAL delivers a simple user experience. Unique multisport features like Touchless Transition, Multisport Handover and Perfect View Zoom create a seamless performance advantage whether training or competing. Designed with a 64 color screen, ceramic bezel and gorilla glass lens, ELEMNT RIVAL not only looks great for everyday use but will also withstand your hardest workouts. SIMPLE TO USE CUSTOM WORKOUT SCREENS The intuitive ELEMNT Companion App guides you through set-up, customizing settings, configuring workout pages, and linking ELEMNT RIVAL to your training apps and sensors. SIMPLE TO SEE PERFECT VIEW ZOOM: Zoom in and out of workout screen to focus on the metrics that matter SIMPLE TO TRACK TOUCHLESS TRANSITION ELEMNT RIVAL is the smartest multisport watch for triathletes, as it automatically tracks your performance across swim, bike, and run without needing to interact with the watch during transitions Specs - Physical Dimensions: 10in Lx2in Wx0.65in D (25.4cm L x 5.08cm W x 1.65cm D ) - Display Size: 1.2" (30.4mm) - Weight: 53g - Battery: Rechargeable via RIVAL USB Charger - Battery Life: Smartwatch Mode of 14 days, GPS/HR Mode up to 24 Hours - Waterproof: 5ATM or 50m - Supported Satellites: GPS and BEIDOU Galileo In the Box -ELEMNT RIVAL Multisport GPS Watch -USB charging cable -Quick Start Guide (QSG) -Important Product Information guide (IPI)
Vittoria Pit Stop Tire Sealant
$14.99 - $15.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
USWE Airborne 3
$119.95
AIRBORNE 3 is an action bike backpack beyond anything else out there, full of high-performance features perfect for the mountain bike junkie. Here you get our award-winning No Dancing Monkey 4-point Suspension Harness that guarantees zero bouncing on your back, but still allows you to feel 100% free in action. This is every singletrack rider's favorite: it's superfast – except there's no rocket engine included. Sorry, you'll have to do the pedaling. - Zero bounce with NDM 1.0 harness - Our patented 4-point harness system for an absolute perfect fit with zero bounce - Magnetic Tube Clip-Keeps your tube in a secure and accessible position at the front - 3L or 2L storage with the detachable multi pocket-Decide if you go light or superlight for the day DESIGNED FOR OFF-ROAD The AIRBORNE is the perfect lightweight hydration sports backpack while going on your wild MTB rides. The ventilated back panel with foam ridges and the NDM tech and high-vent shoulder straps gives you the absolute best and snuggest fit, without messing with your balance or style. STAY HYDRATED IN ACTION If you get thirsty, just grab the drink tube from the super strong magnet clip that's attached to the harness and take a few refreshing sips from the 2.0 liter Elite hydration bladder that's buckled up inside the main compartment on your back. We like it solid and simple, so we picked a premium bladder for you with a Slide-Seal top and Plug-N-Play coupling for easier handling. PACK YOUR GEAR The total pack volume of the biking backpack is 3 liters but can easily be transformed into 2 liters by detaching the external multi-pocket where you carry your spare tube, multi-tool and/or rain jacket. It's simply your race mode that will decide if you go light or superlight for the day. You can even secure a full-face helmet on this baby! For visibility there's an easy and secure attachment for a bike LED-light, and reflective points both front and back.
Tri-Flow Superior Lube
$5.99 - $127.10
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
Topeak Basket Front (w/ E-Bike Fixer 3e)
$62.99
A sturdy handlebar-mounted metal basket for shopping trips, quick jaunts around town. New QuickClick Handlebar Mount (Fixer 3e) allows installation on eBikes to make attachment and removal a breeze. - Capacity: 16L/975 Ci - Weight: 1370G/3.02 Lb - Size: 35x26x25cm/13.8”x10.2”x9.8” - Attachment: QuickClick Handlebar Mount (Fixer 3e) Fits 25.4mm and 31.8mm handlebars (shims included)
Topeak Fixer 3e Front Basket Handlebar Bracket
$26.95
Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units. - Fits up to 1-inch handlebars
Topeak Floor Pump Parts Kit
$4.95
Replacement parts for JoeBlow Pro and JoeBlow Booster.
Topeak MTX Dual-Side Frame
$42.95
Boost the carrying capacity of your Topeak MTX BeamRack (sold separately) with their Dual-Side Frame. It enables you to attach panniers and other Topeak MTX bags to your BeamRack.
Topeak MTX TrunkBag DX
$114.95
Topeak's MTX TrunkBag DX boasts an expandable main compartment to carry all the gear you need. It's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. Plus, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately). - Capacity 12.3 L / 750 ci - Compartments 1 Divided main compartmetn, two side zippered pockets, Multi-expanding top compartment - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 36 x 25 x 21.5-29 cm / 14.2” x 9.8” x 8.5”~11.4” - Weight: 985 g / 2.17 lb
Topeak MidLoader Bikepacking Bag
$69.95 - $89.95
Epic offroad bike tours require you to bring all the essential tools and gear to keep from being stranded in the middle of nowhere. Designed to employ the unused space in your frame, MidLoader carries the heaviest items for your bike adventure. Constructed of lightweight, highly water-resistant and durable materials, it mounts and removes quickly with hook-and-loop fasteners. Two water-resistant zippered openings provide easy access to all your gear from either side. - Material: Polyethylene / nylon lightweight, durable, water repellent and stain resistant - Bag Attachment: Hook-and-loop fastener - Top Tube Diameter: Fits 45 - 66mm - Down Tube Diameter: Fits 38 - 70mm - Seat Tube Diameter: Fits 28 - 60mm Size - 3L: 37.5 x 12 x 6cm / 14.8" x 4.7" x 2.4" - 4.5L: 46 x 12 x 6cm / 18.1" x 4.7" x 2.4" - 6L: 54.5 x 13.5 x 6cm / 21.5" x 5.3" x 2.4" Weight - 3L: 277g / 9.77oz - 4.5L: 292g / 10.30oz - 6L: 337g / 11.89oz
Topeak RideCase II w/Mount (for iPhone 4/4S)
$49.95
You've got all these cool apps on your iPhone for distance, GPS navigation and music—bring it with you on your ride with Topeak's RideCase II. This carbon fiber and plastic case fits the 4 or the 4S and comes with both a stem top-cap and handlebar mounts. You can adjust the viewing angle for either portrait or landscape viewing and the weather-resistant shield still allows touch screen functionality.
Topeak Shuttle Gauge Digital
$84.95
Easy-to-read digital gauge can be attached to a pump or used alone and provides accurate pressure readings up to 300psi / 20.7bar. Rotating head works with Presta, Schrader or Dunlop valves on bike / motorcycle / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. The air release button allows fine tuning pressure. Specs - PUMP HEAD COMPATIBILITY: Presta / Schrader pumps - TIRE VALVE COMPATIBILITY: Presta / Schrader / Dunlop valves - GAUGE: Digital, 300 psi / 20.7 bar - UNIT: psi, bar, kg / cm2 - BATTERY: CR2032 x 1 (included) - THUMB LOCK: Aluminum - PRESSURE TUNING: Air release button - BODY: Aluminum / Engineering grade polymer - SIZE: 9.2 x 5.8 x 4.3 cm / 3.6” x 2.3” x 1.7” - WEIGHT: 102 g / 3.60 oz Added Features: - Rotatable head / gauge - Auto-off function
Topeak Tablet Drybag
$59.95
Specifically designed for up to an 8.5” tablet to provide ultimate protection against water and dirt. QuickClick handlebar mount (Fixer 9) is angle adjustable and holds the tablet close at hand.
Tifosi Alliant
$49.95 - $79.95
Sleek angles and premium materials define Alliant as a performance sunglass for cyclists, runners, and endurance athletes. Vented lenses improve airflow while the adjustable ear and nose pads of hydrophilic rubber increase grip as you sweat ensuring a perfect, stable fit. - Made of Grilamid TR-90, a homopolyamide nylon characterized by an extremely high alternative bending strength, low density, and high resistance to chemical and UV damage. - Hydrophilic rubber ear and nose pieces for a no-slip fit. - Adjustable ear and nose pieces for a customizable, comfortable fit. - Vented lenses improve air circulation, prevent fogging.
Tifosi Crit—Black/Red Fototec
$79.95
Crit Fototec is equipped with a photochromic Clarion Red lens, a tint that goes from nearly clear to a red mirror with a smoke tint, providing the perfect light day or night. Crit is a sunglass designed for endurance sports. It offers an aerodynamic design and engineered lens ventilation, which make it perfect for long rides on a bike or runs on the track. The adjustable arm and nose pieces are made so that you can customize them to securely fit your face shape. - Frame: Light & Durable Grilamid TR-90 - Lens: Clarion Red Fototec – Shatterproof polycarbonate lens that repels water with a tint that starts nearly clear and darkens in sunlight to a smoke tint with red mirror - Features: Vented half frame, fully adjustable nose & ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Medium-Large | Weight: 31G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag
Page 1 of 172 Next page