Parts & Accessories

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

While the classic seat pack is a great place to store little-used essentials out of the elements, their mounting systems can interfere with and often damage modern dropper seatposts. Valais allows the use of a traditional seatbag on a dropper seatpost. - Allows the usage of seat packs on a dropper post - Protects the dropper stanchion from wear and grit - Can act as a travel limiter when full drop isn't needed - Sized by stanchion diameter

Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units. - Fits up to 1-inch handlebars

• Constructed of impact resistant Nylon • Carry lightweight roundish objects such as insulated Nalgene bottle holders, thermoses, Gatorade jugs, small dry bags, and ultralight sleeping pads and shelters • Mounts to water bottle cage mounts via Salsa’s Three-Pack pattern • Includes two nylon straps • Cargo Weight Limit: 6.6lbs (3kg) • Cage Weight: 149g

Stash your ride snacks, repair kit, or other ride essentials in this secure and stylish KEG. - Fits in standard bottle cages - Keeps contents secure and dry - Matches Salsa Dawn Patrol socks, bottle, and hat

The Salsa EXP Series Rubber Strap is a strong, adjustable strap that holds your gear securely to Salsa Anything Cages, Anything Cradles, or racks. Use them anywhere you need to secure a load on your bike. - UV- and weather-resistant - Includes band to keep excess strap out of the way - 22" length is best for use with Salsa Anything Cage and Anything Cage HD - 30" length is best for use with Salsa Anything Cradle - Sold in pairs

Lower mount kit for all Salsa's Alternator Racks (sold separately)

The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.

Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

The EVOC FRAME PAD protects the bike frame from scratches and other transport damage. - Fits most bike frames - Attachment for handlebar - Velcro straps attachment

Phone Pouch

Tool Wrap WP

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it. - Mounts to the B-RAD system or on its own - Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.

Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB

By using the accessory bolt mounts on a frame or fork, the Wald Standoff kit allows the user to space a basket or rack away from other components that would otherwise be in the way, like disc brake calipers. - 2 Phillips head frame bolts in 1.5-inch (38mm) length - 2 Standoff spacers in 1-inch (25.4mm) length

The Gel Fuel Rack / NDM 1 give the user the ability to reach their gels and similar snacks at any time while our on the trails. The "grab-n-pull" aspect of the rack makes it super fast for you to fuel up with new energy. The accessory is compatible with backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. This attachment is compatible with the following products: - Raw - MTB Hydro - Airborne - Ranger - Patriot - Vertical - Outlander (NOT Compatible with Outlander PRO) With the Gel Fuel Rack / NDM 1 you'll always have instant access to your gels or other small snacks. The "grab-n-pull" make it super fast to fuel up with new energy. The accessory can be attached to the harness of all backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. The accessory is simply attached to the Velcro shoulder strap. This attachment is compatible with the following products:

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags. - Material : Injected Nylon - Weight: 30g / 1.06 oz

Fast and easy attachment of Topeak handlebar bags. - Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

Allows Thule Yepp Maxi to be installed on a bike with a rear rack with a load capacity of at least 35 kg/78 lbs and the ability to carry seat and bike bags. Features: - Fits rear racks measuring 11-17cm/4.5-6.7" - For use on rear racks with a load capacity of at least 35kg/78lbs

Extend the life of your Dummy bags with this replaceable wear patch.

Surly's Dummy Deck provides a light, durable platform for cargo bikes, built to Xtracycle's Longtail standard — including the Big Dummy, of course. The Dummy Deck is stamped from 4mm-thick aluminum, chosen for its strength, durability, and recyclability, and it bolts directly to Surly Dummy Rails to stiffen and stabilize the whole system (it's also compatible with Xtracycle V-racks by using Xtracycle's SuperHooks). It features cut-outs for routing straps and cordage, a mounting hole for a rear light bracket, accessory-mounting holes, and countersunk holes for SuperHook hardware.

Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails. WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Dummy Rails support Dummy Bags on your Big Dummy cargo bike, and Surly's Dummy Deck bolts directly to them, stiffening the whole system for a more stable load. Dummy Rails are made of light, strong aluminum and were designed in conjunction with the Dummy Deck and Dummy Bags; each component works best when used with the others. Like all Surly products, they've built in lots of useful details. For example, the deck-attachment bosses stick up from the rails to create space between the deck and rails, providing windows to route tie-down straps and cordage; and threaded bottle cage bosses located at the rear of each rail provide mounting locations for accessories: bottle cages of course, or lights, cameras, pumps, flags, horns, light saber scabbards, disco balls, spittoons, cornucopias, etc. Dummy Rails will work with cargo frames (including the Surly Big Dummy) built around Xtracycle's longtail standards.

Surly Front Rack Hardware

Surly's Junk Straps are basically really long toe straps. They're 120cm woven nylon with a stainless steel buckle. Surly had them made to specification to ensure that they work well and last a long time. They're easy to use and they stay tight. Once you're ready, loosening them is quick and easy. They're light, pack small, and securely and conveniently attach all kinds of stuff to your rack, basket, handlebar, backpack, under your seat, around your thigh…just about anyplace. You can combine them for even longer straps. - Pack of 6

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap

Designed for use in the Surly Petite Porteur House. Neon color to make it easier to find objects inside a dark bag. - Urethane coated, water-resistant nylon stuff sacks - Drawstring closure

Replacement Surly Bicycle Mounted Rack Parts - Direct replacement item for Surly racks - Replacement upper tubes, made from Stainless steel

All the hardware for the lower portion of your Surly rear rack. Stainless steel.

Suitable as a tourniquet or stylish headband in a pinch, the Whip Lash's primary function is to help you attach whatever needs attaching to your bicycle frame. Available in a multi-pack that includes two 550mm lashes and one 695mm lash, the Whip Lash's potential is limited only by your imagination. You could use one to strap your beverage to the down tube when the trail says you ought to keep your hands on the bars. Or you could use another to fix your fishing gear to the top tube when rack space is maxed out. Whatever you get into on or off the bike, they're handy to have around because they're light, compact, and easy to use. Rubberized on one side to keep your stuff from slipping around, the Whip Lash's trimmable design features nylon construction and a simple hook-and-loop style closure.

- Diameter: 8mm - Overall Length: 345mm - After Bend: 270mm - 45 degree bend

The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0mm or 31.8mm clamp diameter. - Compatible with 35.0mm bars or 31.8mm bars (with included shims) - Compatible with all Salsa EXP Series Anything Cradles - Hinged clamps allow for easy installation and removal from handlebars - Made of 6061 forged aluminum

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two

- Spacers for Explorer Exp Barbag

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

What should you do with all those small, but important extras on your bikepacking tour? The best place to put your snacks, smartphone, rain slicker, and other items is in your ORTLIEB Accessory-Pack. This convenient volume expander for your Handlebar-Pack keeps your things secure, absolutely waterproof, and quickly accessible at all times. Use the metal hooks to securely attach the Accessory-Pack to the four points of attachment on the Handlebar-Pack. And if you don't plan on spending the night outdoors and don't need your Handlebar-Pack, you can still use your Accessory-Pack as a handlebar bag thanks to its pre-mounted Velcro straps. You can even use the carrying strap to transform the lightweight bag into a shoulder or hip bag.

If you have unconventional handlebars (sold separately) but still want a bag with easy access when riding then pick up Ortlieb's Extension Mounting Set for the Ultimate5 handlebar bag (sold separately). It pushes the bag out front further than normal so you can still use your fun hand positions and enjoy the convenience of a handlebar bag.

The integrable mesh inner pocket with zipper for the Handlebar-Pack QR. For all small items, such as wallet, snacks, cell phone or keys.

- Strap with buckle and hook for supporting the Seat-Packs - Prevents lowering of pack with uneven weight distribution - Additional support for Seat-Pack straps when fully loaded - Excessive strap is fixed with Velcro - Can be used for Seat-Pack M and L

The Lizard Skins Tube Strap is an easy way to stow a spare tube. The minimally designed Tube Strap is a lightweight on-bike storage solution for any rider. This versatile strap is made to securely attach under seats and other locations on bike frames. - On-bike storage solution - Inner sleeve to compress a tube - Silicone strips for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 1.3oz (37g)

The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle. - On-bike storage solution - Inner sleeve to compress the tube - Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc. - Wide strap and durable metal buckle - Silicone and rubber grip for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 4oz

These handy adapters are for mounting a rack on bikes where clearance is needed for disc brake calipers or other accessories. - Screw them into the same holes on the dropouts for rack or fender bolts - Made from special hardened aluminum stock with a threaded steel insert - Best when only torqued to the same degree as rack bolts - Pegs are about .75" long - Can be used single sided or double sided - Sold in Pairs

The Jandd Reflector Mount allows riders to attach a reflector to a rack.

- 250mm seat stays for the Classic Disc Rack (PN 730387-01) - Sold as a pair

Round Monostay Adapter - Hardware included