Taillights

- Battery tail lamp with reflector for rear rack - Compatible with 50mm, 80mm and 19mm (center mount) - Waterproof construct IPX4 - Built-in wide angle reflectors - Meets StVZO, RKF and Danish lamp standards - Meets StVZO Z, BS, UN IVA, UN IA and CPSC reflector standards - Low battery indicator - Tool-free battery replacement

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.

Long battery life combined with simple, tool-free mounting makes MSW Mouse lights a great economical pick to be seen on the road. - Simple, tool-free mounting on bars from 22.2 - 35mm - 3 lighting modes: high, low, flash - CR2032 battery included

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

CatEye's Omni 5 Taillight uses Omni Directional Technology for 360 degrees of visibility. Five super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 120 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Planet Bike's Spok Taillight ensures you'll be seen for up to a mile! It boasts a super-bright LED and a translucent casing that allows 220 degrees of visibility. The rubber strap can be used to mount the Spok on seatposts or odd shaped tubes of all sorts and sizes. And, this little baby runs up to 100 hours with the included CR 2032 battery. There's even a keychain hole for portability!

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 50 mm - Visible from the side - 40g

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 80 mm - Visible from the side - 40g

Charge, Click, Go! Hassle-Free Safety Light Just press the lens and, click, traffic can see you! A silicone mount lets you attach this powerful little light almost anywhere, and the handy LED fuel gauge tells you when it’s time to recharge with its micro-USB cable. No more batteries — just charge, click and go! - Charging Cable Included, No Tools Required - Lithium Polymer Battery - Waterproof To Ip-65 Standard - 3-Hour Recharge Time

This handy clip-on light may be the most important accessory you pick up for your bike trailer. Stay safe while riding in low-light conditions by adding extra visibility to your trailer. With 5 LED bulbs and 4 light modes, you’ll be easier to see for drivers and other cyclists, day or night. You’ll Love – - 5 LED bulbs for higher visibility - 4 light modes (flashing, constant, chasing, and random) - Compatible with any Burley trailer that has a Light Loop or Light Bracket - Includes clip-on light and 2 AA batteries

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 12 lumens. IPX7 water resistant rating. Composite matrix construction. E-bike compatible (6v input, 0.4w / 12v input 0.8w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm-long power cable included. 50 and 80mm mount spacing. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

Stand out at night! The Blinky 3H combines 3 bright LEDs with a parabolic reflector for up to a mile of visibility. And, its self-leveling helmet mount ensures optimum visibility as you ride. It also includes seatpost and seatstay mounts. The Blinky 3H has steady and flashing modes and runs for up to 100 hours on the included AAA battery. Also, this light includes a reflective lens and side reflective strips for extra safety.

Maximize your visibility with this amazing taillight. The Blinky 7 aims 7 bright LEDs directionally to provide over 220 degrees of light visible from up to a mile away! The ultra-compact case is weatherproof, light and durable. And, the Blinky 7 includes a bike mount, clip mount and arm strap. Plus, the included 2 AAA batteries offer run times of up to 100 hours.

-PB power array and reflector provide visibility for up to 1 mile -Steady, Superflash and Courtesy flash modes -Ultra compact case is weatherproof, lightweight, and durable -Rear rack and seat post mounts included -Up to 150 hours of run time on 2 AAA batteries (included) -85 grams

Be safe out there with Serfas' TL-STN Seat Stay Taillight. This water-resistant safety beacon will get you noticed out on the road with a large, super-bright 1/2-watt red LED flanked by 6 brilliant smaller LEDs. Plus, the weatherproof silicone body stretches to easily mount to any tube on your bike. Use a few Seat Stay Taillights for 360-degrees of visibility! This great light has steady, strobe and flash modes.

This is the “Next Generation” of our compact and versatile fast-mounting bike lights. Their mission: to help cyclists boldly go where no cyclist has gone before. - High output surface mounted LED provides steady, Courtesy, and Superflash modes - FL1 tested run time: 4.5 hrs (steady – 5 lm), 7 hrs (Courtesy™ 1.5-4.5 lm) and up to 22 hrs (Superflash - 5 lm) - Side cut outs provide 270° of visibility - Dust & water resistance rated to IP54 standard - 270 mAh lithium polymer battery charges in 2 hours with micro USB cable (included) - Diminutive size and fast mounting rubber strap mounts to multiple mounting locations in seconds without tools - 25 grams

The Superflash 65 brings a whole new level of versatility to battery powered tail lights. With four modes (High, Low, Courtesy and Superflash) this tail light provides 65 lumens and 220° of visibility that will get you noticed day or night. - Cree XBD and high output surface mounted LEDs provide 65 lumen output with high, low, Courtesy and Superflash modes - FL1 Tested - Run times: 40 hrs (high – 30 lm), 90 hrs (low – 7 lm), 45 hrs (Courtesy - 20-60 lm) and up to 130 hrs (Superflash - 65 lm) - Provides 220° of visibility - Highly visible, even in daylight - Dust & water resistance rated to IP64 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts and horizontal clip mount for multiple mounting options - 70 grams

The ORB Bar End safety lights pair a sleek, compact design housed in an alloy chassis. They improve your chances of being seen, both from the rear and side. - Compact and lightweight - Side visibility - Fits drop bars with an inner diameter of 18.5mm-22mm - CR2032 battery x 2 - Long runtime - 3 modes

Long running battery-powered rear light with high waterproof rating of IPX7. Built-in "Brake Mode" function will alert others behind you of your deceleration. - Built-in acceleration sensor for Kinetic mode (Brake mode) - Automatically turns on Hi for 2.5 sec when bike deceleration is detected - Waterproof IPX-7: Operates even after 30 minutes of submersion in a depth of 1 meter - Long runtimes - 360 degree visibility - 5 LEDs - 3 modes - Mode memory function - FlexTight SP-11 bracket (Ø12-32mm) - Snap System - Flashing Mode: 160 Hrs - Constant: 70 Hrs - Rapid Mode: 140 Hrs

Lezyne Ebike Super Bright Alert Taillight: Powerful, low-profile StVZO certified e-bike taillight with custom-programmed Alert Technology. It features 10 high-output emitters that provide a constant 12 lumens and then 24 lumens when deceleration is detected. Its co-molded design is constructed from durable Composite Matrix material, which provides an IPX7 waterproof rating. It comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Stainless steel mounting hardware is included. Compatibility: 6 – 12v input, 1.2w / 2.4w (Alert mode). Download the manual below for further installation and compatibility details. - Alert" brake light function - STVZO optimized lens - 130cm cable - Includes stainless steel hardware

To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h

Maximize your visibility with this amazing taillight. The SuperFlash aims 2 extreme LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! The ultra-compact case is weatherproof, light and durable. And, the SuperFlash includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.

The Grid Rear Light has four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid Rear Lights offer plenty of rechargeable power to keep you visible while out riding. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tell you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

Portland Design Works' Fenderbot Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and precision reflector to notify others of your presence. And, the Fenderbot bolts directly to your fender so it's always on your bike. - Bright red LED and precision reflector - Bolts directly to fender to prevent theft - Weatherproof exterior for all season riding - Weight: 62 g (2.2 oz) - Runs on 2xAAA batteries (included) - Lifetime PDWarranty

The rebirth of an iconic bicycle light, the Frog Rear Bike Light: bright, versatile & fun. A design that millions of riders around the world have come to love. Powerful enough for everyday commuting or used to complement an existing lighting set-up. Taking cues from Knog’s more advanced lights, Frog is designed with Chip on Board LED technology, enabling a high intensity light that's compact, low profile and packed with features. - Punchy 20 lumen output - Integrated flexible mounting system - 9 eye-catching modes - Water resistant with IP65 rating - Super lightweight at just 20 grams - USB-C rechargeable (cable not included) - Curved lens provides side illumination - Battery level indicator - Up to 60 hour runtime - Simple one-button operation - Available in 6 fun-loving colours

- Modes include High Flash, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 7.5 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports

Portland Design Works' Radbot 1000 Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and a precision reflector to notify others of your presence. And, the Radbot includes mounts for a rack, seatpost, seatstay, and backpack, so you can put it wherever you want. - 1.0 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty

Compact, bright, and versatile, the ViZ150 stands out with high visibility from OptiCube lens technology and Daytime Hyperflash mode in an economical package. - 3 LEDs (150 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable (Micro-USB cable included) - Low battery indicator - 4 modes *Charging time: 3h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (20 lumens):5 hrs - Flashing (15 lumens):70 hrs - Group Ride (50 lumens):11 hrs - Daytime Hyperflash (150 lumens):15 hrs